Before you start using your set-top box, you need to follow these initial steps.
Connect the HDMI cable's connector to the "HDMI" port and to your TV.
Connect one end of the network cable to the "ETHERNET" port and the other end to a LAN port in your modem or router.
Connect the power supply to the power plug and to a wall socket.
Press On/Off on the remote control.
Press SOURCE or INPUT on your remote control.
A list of connected inputs is displayed on the TV screen.
Select the HDMI input that your set-top box is connected to.
If you're asked to, activate the Bluetooth connection for the remote control by following the instructions on the screen.
Highlight Start set up.
To use an ETHERNET cable, connect it to your set-top box, select Wired and follow the instructions on the screen.
To use Wi-Fi, highlight Wi-Fi - Scan.
Highlight the required Wi-Fi network.
Key in the password for the Wi-Fi network and highlight Connect.
Highlight Agree & Continue.
Follow the instructions on the screen to register and log on as an ITV user or highlight DO THIS LATER.
Select the required settings and highlight Continue.
Highlight the required setting.
Follow the instructions on the screen to turn TV marketing on or off and highlight Next.
When this screen is displayed, your set-top box is ready for use.